In the process of using power-assisted tricycle
s, strengthen maintenance and maintenance, master simple parts maintenance common sense, and develop good usage habits, which can prolong the service life of the vehicle. 1. The new car should be used for 1-2 weeks. Generally, the whole car should be fully inspected, and the parts that are easy to loosen should be tightened and adjusted in time. The rotating parts (rear axle, front axle, front fork) and transmission (chain, sprocket) should be frequently adjusted. Check and maintain relative moving parts (handbrake, foot brake), add lubricating oil in time, fasten the fastening parts in time, and adjust the tension of the chain in time. 2. Brake: Regularly adjust the foot brake and hand brake. The braking distance of the vehicle must be effectively controlled within 4 meters. At the same time, the brake power switch must be able to power off in time. 3. During the use of the motor, the commutator should be cleaned regularly and the brushes and planetary gears should be replaced regularly. It is strictly forbidden to overload the motor. Pay attention to moisture and prolong the service life of the motor. Generally, check the brushes every 2-3 months. If you need to replace them, you should Adjust in time. It is recommended to open the protective ring on the motor in high temperature season to help heat dissipation, but it is not suitable for rainy days. All electrical components and wiring connections should always be kept clean to prevent oxidation to avoid poor conduction. Four, charging attention: 1. When the power supply voltage is low or the battery is used for a long time (the performance is deteriorated), the charging time exceeds 10 hours and cannot be converted to floating charge. At this time, as long as the ammeter indicates close to zero, it means that the battery is fully charged. Does not affect normal driving. 2. The normal charging current should not be greater than 18A. When it exceeds the safe value, the internal alarm device will keep beeping, reminding you to reduce the charging current to ensure the safety of the charger and battery. It is normal to occasionally ring due to unstable power supply voltage. Phenomenon, no adjustment is required. V. Battery maintenance: 1. The surface of the battery should be kept dry and clean. Metal and other debris must not be accumulated on it to prevent disconnection. 2. Absolutely do not use the power loss, even if the vehicle is not used temporarily, charge it once 2-3 days, otherwise it will affect the battery life. 3. If the battery is found to be depleted, it must be continuously charged for more than 36 hours before it can be used, otherwise the battery will not last long. 4. The battery should maintain a normal liquid level. If it is found to be short of liquid, add distilled water (before charging). It is forbidden to add charging liquid, replenishing liquid or other water quality. 6. Attention 1. Due to the low temperature in winter, the battery discharge effect is poor, and the vehicle mileage is only 60% of normal, which is purely normal. Please do not misunderstand the battery quality. 2. If the motor is burned out due to the delay in replacing the brush, our company will not be responsible.
Mainbon Group Company Limited. specializes in undertaking corporate offers to cater the needs of different companies.
Helping the needy custom electric bike industries with quality products had been our main goal and we have succeeded in providing simple and effective solutions which has a huge scope to be implemented in the near future. Go to Mainbon Electric Tricycle Bike
to know more about us.
This is crucial when you need to maintain innovative information in custom electric bicycle
We focus on operational procedure and manufacturing facilities of custom electric bicycles.