What are the common faults of electric scooters

What are the common failures of electric scooters? The use of two-wheeled electric scooters can be seen from everywhere on the street to know how common it is, but electric scooters always seem to have some problems. How much do you know about these common failures? ? Let’s take a look at the common faults of electric scooters from electric scooters: Common faults of electric scooters 1: The motor does not turn, and the instrument is normal. 1. Unplug the socket of the brake lever. If the motor is running, it will be the brake lever. If it fails, the brake lever should be replaced. 2. If the voltage does not change or is less than 1V when the voltage is detected, it means that the switch is faulty or the switch wire is short-circuited. 3. Check the motor Hall signal line. If the voltage does not change, the motor Hall is damaged. If each voltage changes normally, the controller may be damaged. Two common faults of electric scooters: The motor stops when it rotates. 1. The battery voltage will stop when it rotates when it is under-voltage critical. 2. Poor contact of the battery connector will also cause this failure. 3. The wire of the speed control handle should be disconnected and the brake power-off switch is faulty. 4. Damage to the power supply lock or poor contact, poor connection of the line connector, and weak welding of the components in the controller will cause the motor to stop at the time of rotation. This is the end of the introduction to the common faults of electric scooters from Shandong two-wheeled electric scooters wholesale manufacturers. You have some understanding of the fault information of electric scooters. I hope our introduction can be helpful to everyone. If you want to know more information about two-wheeled electric scooters, please continue to pay attention to the official website of electric scooters! Previous post: What is the reason for the frustration when walking on electric scooters? Next: Electric scooters remind you of the precautions for cycling in rainy days
In the past few decades, custom electric motorcycle production has increased because of the use of custom electric bicycles.
Mainbon Group Company Limited. will provide branded products and services of superior quality and value that improve the lives of the world’s consumers.
Another way to maintain the professional yet engaging innovative technology in custom electric bicycles is by embedding new skills directly on manufacturing.